The European Theoretical Spectroscopy Facility (ETSF) is a research network and e-infrastructure comprised of 68 research teams across Europe and the United States. It carries out state-of-the-art research on theoretical and computational methods for studying electronic and optical properties of materials. All fields in need of knowledge about electronic excitations, transport and spectroscopy may benefit from the ETSF, such as condensed matter physics and chemistry, biology, materials and nano science. The ETSF gathers the experience and know-how of more than 200 researchers in Europe and the United States, facilitating innovation and rapid knowledge transfer.

The research network focuses on **ETSF scientists' collaborative research**, including the development of new theory and algorithms for describing spectroscopic processes. The ETSF regularly organizes training events targeted at young researchers wishing to pursue a career in the area of theoretical spectroscopy.

The main objective of the ETSF User Infrastructure is to **broaden access, across the public and private sectors**, to the knowledge and the expertise we have built up in the field of theoretical spectroscopy. The ETSF facilitates its codes' availability through standardization of codes' files, libraries and tools. Its users, e.g. experimentalists, scientists working in industry, or researchers working in a similar field, are invited to participate to training events or apply for specifically targeted training for small groups or for a single person. The ETSF also fosters collaboration between theorists from the ETSF and researchers from other communities, experimentalists as well as theoreticians, thanks to an open call for proposals. The Materials Evolution initiative proposes a service of high-throughput computational materials design for a fast transfer of knowledge to industry and *in fine* to any innovator.

The ETSF has two facets, a research network and a distributed user infrastructure. It consists of 68 prominent European condensed matter theory research teams led by Research Team Leaders. **The ETSF has a horizontal structure.** Activities are initiated and carried out by ETSF members on the basis of their motivation. Activities are grouped into *teams *or *initiatives *that are independent from each other and coordinated by a volunteer.

The global coordination is taken care of by the **Steering Committee** (SC). It is the ETSF representative, decision-making and arbitration body. The SC is also responsible for relationships with other scientific networks such as CECAM and PsiK. As the user-oriented initiatives have specific constraints and needs, the SC appoints a **Contact group** (CG) that ensures a closer coordination, promoting communication and synergy between them and with the network as a whole. The CG reports to the SC.

It consists of 9 elected Research Team Leaders and is elected every three years. The current SC members are:

Prof. Matthieu Verstraete (Université de Liège, Belgium) - Chair

Prof. Rex Godby (University of York, United Kingdom)

Prof. Andrea Marini (National Research Council, Italy)

Prof. Giovanni Onida (Università Degli Studi di Milano, Italy)

Dr. Francesco Sottile (Ecole Polytechnique, Palaiseau, France)

Prof. Lucia Reining (Ecole Polytechnique Palaiseau, France)

Prof. Myrta Gruning (Queen's University Belfast, UK)

Prof. Gian-Marco Rignanese (Catholic University of Louvain, Belgium)

Prof. Claudio Verdozzi (University of Lund Sweden)

It is appointed by the SC. Each member is more particularly overseeing an aspect of the user infrastructure. The current Contact Group members are:

Dr. Silvana Botti (Friedrich-Schiller Universität Jena, Germany) - efficient use of ETSF members' competences, especially for users' needs

Prof. Xavier Gonze (Université Catholique de Louvain, Belgium) - internal and external communication

Dr. Martin Stankovski (LU Open Innovation, Sweden) - contact with industry

The ETSF social policy would like to promote the future careers of young researchers, female and male, and be an example for a humanistic approach to science and research.

The User Community is fundamental to the purpose of the ETSF in widening access to knowledge and expertise in the field of electronic excitations. It is composed of anyone from the public or private sector who has a need to engauge with this field. Users are, for example, experimental researchers needing theoretical input into their work, or companies with a need for the specialised resources that ETSF can provide to help to develop new products.

The ETSF offers a wide variety of ways of sharing knowledge, depending on the expertise and needs of the User: this may be, for example, support for use of specialised software, placement of a member of the User's organisation for training, undertaking of a fully-collaborative project or a service provision in which the User is the 'customer'.

Users are also supported through this web site and by an ongoing series of workshops and other training events.

The interaction between matter and radiation (including electrons, light, X-rays, lasers, and other modern photon sources) is the key to the study of a vast array of materials, ranging from solids and surfaces to atomic and nanoscale systems. Theoretical spectroscopy is the powerful combination of quantum-based theories and computer simulation applied to electronic excitations. By employing a wide range of theoretical and computational methods, ETSF researchers can study electrons inside such materials and explain their interaction with external fields and light.

Through theoretical spectroscopy it is possible to:

- Analyse and explain experimental data (ellipsometry, EELS, Raman, IR, NMR, X-Ray, ARPES, STS, I/V transport, etc.)
- Achieve remarkable technological and fundamental breakthroughs, such as new functionality (optoelectronics) or biological applications

As an illustration of the present capabilities of theoretical spectroscopy, ETSF researchers have written a series of articles describing applications to a variety of technologically relevant materials, including biomolecules, organic semiconductors, phase-change materials and silicon nanostructures. The collection is published in Comptes Rendus Physique (Volume 10, Issue 6, July-August 2009, Pages 465-586).

The theoretical approaches used and developed by the ETSF are based on "quantum mechanics". Quantum mechanics is the theory that describes the behaviour of systems at atomic length scales. In quantum mechanics the key quantity is the "wave function", Ψ(*r _{1},...,r_{n}, t*), for a system containing n electrons. The wave function fully describes the physical state of the systems, and gives access to all its physical properties. The wave function can be calculated by solving the "Schrödinger equation", $H \psi = E \psi$

Except for systems containing a small number of electrons, the Schrödinger equation cannot be solved, neither analytically nor numerically. The problem is due to the electron-electron many-body interaction term. If this term were not present, the Hamiltonian could be factorized into n separated single-electron Hamiltonians. One can solve the easier single-electron Schrödinger equation, after which the many-body wave function can be calculated as the antisymmetrized product of n single-electron wavefunctions.

Therefore it is necessary to develop approaches and techniques that simplify the original problem. The knowledge of the full wave function, i.e. complete knowledge of the complete dynamics of each given electron, involves an overwhelming amount of information, which, like in statistical mechanics, is redundant for determining quantities which are of real observer interest. The solution of the problem can be sought by defining new reduced key quantities which contain the essential information needed to provide observables.

The ETSF employs a wide range of theoretical and computational methods to study electrons in nanostructures and materials and their interaction with external fields and light, the principal ones being:

- Kohn-Sham DFT for ground-state total energy calculations, structure determination, potential energy surfaces for atomic motion.
- Time-dependent DFT for study of systems excited out of the ground state, e.g. optical absorption.

- GW and GWΓ self-energy approaches for electron addition and removal energies, spectral functions, total energy.
- Bethe-Salpeter approach for neutral electronic excitations.
- Non-equilibrium Green's function theories for Quantum Transport.

- Generalised Kohn-Sham DFT for total energy calculations, incorporating elements of DFT and MBPT
- GWΓ self-energy, incorporating Density Functional concepts.
- TDDFT approaches for quantum transport.
- TDDFT approaches for total energy calculations, via the fluctuation-dissipation theorem

In Density Functional Theory (DFT) the electronic density *ρ(x)* is the key quantity. The "Hohenberg-Kohn theorem" establishes that the density is in a one-to-one correspondence with the external potential, *v _{ext }(r)*, e.g. the potential determined by the positive ions which at the end is the only quantity that changes in the Hamiltonian when passing from a condensed matter system to another. Thanks to this theorem, all the ground-state observables can be expressed as unique functionals of the density,

The Hohenberg-Kohn theorem further provides a variational principle which states that the exact ground state density of the system is that which minimizes the total energy, *E _{0} = min_{ρ} E*[

The problem can, however, be reformulated in other terms: in parallel to the real electron-electron interacting system, one can introduce a ficticious non-interacting system, called the Kohn-Sham system, which features an effective external potential such that the electronic density of this system exactly coincides by construction with the electronic density of the real system. The calculation of the electronic density is hence simpler within this system than within the real system. One needs to solve a one-particle Schroedinger equation, with a Hamiltonian containing a kinetic and an effective external potential term. Then the states of the systems are filled with a Fermi-Dirac distribution until all the electrons are accounted for up to the Fermi level. The density is hence calculated by . This constitutes the Kohn-Sham set of equations and the scheme is known as the Kohn-Sham scheme. The only problem is now that we have to provide appropriate forms to the effective Kohn-Sham potential, which contains the real external potential, the Hartree classical repulsion term, and an unknown term, the exchange-correlation potential. This term need to be approximated. The most used approximations are the Local-Density Approximation (LDA), or the Generalized Gradient Approximation (GGA).

DFT is, in principle, an exact theory for predicting ground state observables, such as the ground state energy, the electronic density, the atomic structure (lattice parameters, atomic positions), but also (thanks to perturbation theory), elastic constants, bulk moduli, phonon and vibrational frequencies.

To access excited-state properties, one needs to introduce a complication into the theory, which is the time-dependence, thus passing to Time-Dependent Density-Functional Theory (TDDFT). The "Runge-Gross" extends the Hohenberg-Kohn theorem to time-dependent external potentials and densities, *O*[*ρ(r,t)*]. TDDFT can in principle access excited-state properties, in particular the neutral excitations (excitations in which the system does not undergo a change in the charge, the number of electrons being kept constant). These include: optical spectroscopies such as optical absorption, reflectivity, real and imaginary indexes of refraction, etc.; Dielectric spectroscopies, such as Electron Energy-Loss Spectroscopy (EELS), Inelastic X-Ray Scattering Spectroscopy (IXSS), and so on.

TDDFT is versatile and computationally efficient, but the accuracy of the result may be affected by the approximation that we always need to make for the exchange-correlation functional.

Green's function theory, also called (improperly) Many-Body Perturbation Theory (MBPT), is a Quantum Field Theory based on a formalism of second quantization of operators. The fundamental degree of freedom is the Green's function or propagator, $G(r_1,t_1,r_2,t_2)$, which represents the probability amplitude for the propagation of an electron from $r_1,t_1$ to $r_2,t_2$. The main advantages of this theory are that:

- it avoids having indices running over many particles;
- fermionic antisymmetrization is automatically imposed;
- systems with varying number of particles can be treated;
- and most importantly, all the physics of the system is condensed inside the Green's function.

As in any other quantum field theory (for example QED), the many-body system can be expanded in perturbation theory, with the coupling being the many-body interaction term. The Green's function (as well as any other quantity of the theory, such as the self-energy or the polarization) can be calculated at a given order of perturbation theory. A Feynman diagrammatic analysis is hence possible. The theory at the first order is equivalent to Hartree-Fock theory.

However the coupling is not small (compare to, for example, the electron-ion interaction) and the expansion does not converge. The second order is not necessarily smaller than the first. Hence one needs to resort to more complicated methods to solve the theory, such as partial resummations of diagrams at all orders, or better, iterative methods.

In iterative schemes one introduces new quantities into the theory but relating them to the old, in the hope that at the end one can succeed in closing the equations. Indeed, MBPT can be solved thanks to a set of five integro-differential equations, called the Hedin equations, that have to be solved iteratively until self-consistency is achieved.

So far, nobody has solved the Hedin equations for a real system. Approximations are required to simplify the problem. Among the most widely used approximate schemes are the GW approximation for the self-energy and the Bethe-Salpeter Equation approach and its related approximations.

It is unanimously recognised the crucial role of fundamental science in underpinning and generating future technology. The ability to invent new functionalities for nanoscale systems and advanced materials, such as quantum dots, biomolecules, and carbon nanowires, and of designing new devices for specific applications depend heavily on our understanding of the excitation under irradiation by light, electron beams or modern photon sources (synchrotrons, ultra-fast lasers), and also of the reaction of the environment to the electronic response.

The interaction between electromagnetic radiation and matter is of fundamental interest. It creates excitations in the materials leading to phenomena with enormous consequences in domains such as technology, chemistry or biology. These consequences can be desired (like photosynthesis) or not (as in the case of radiation damage due to nuclear waste), but are in most cases complicated to describe. The unprecedented availability of new large-scale computational resources makes it possible to realistically address the challenging world of excited-state physics of complex materials.

Through the powerful combination of quantum-based theories with computer simulation, applied to electronic excitations (theoretical spectroscopy), researchers are now able to:

- analyse and explain experimental data (ellipsometry, EELS, Raman, IR, NMR, X-Ray, ARPES, STS, I/V transport, etc.)
- achieve remarkable technological and fundamental breakthroughs, such as new functionality (optoelectronics) or biological applications

For a more detailed explanation of the work of the ETSF we give a few striking examples as well as an overview following four areas of research, corresponding to 0-dimensional, 1-dimensional, 2-dimensional and 3-dimensional systems.

Table of Contents

Electronic excitations play a key role in biological processes and both the short-range effects around the excitation area, and the long-range ones must be described correctly in the complex biomolecules. We plan therefore technical developments (optimisation of existing codes to describe huge, partially empty supercells, including a better treatment of the continuum), theoretical issues (additional diagrams in the many-body approaches, a description of both short and long ranges in the response functions in time-dependent density functional theory TDDFT), as well as the development of a strategy for a systematic divide-and-conquer approach for excited states.

Developments are tested for the absorption spectra and the femtosecond dynamics of small inorganic molecules such as silanes and silicon clusters. Peculiar aspects like spin, Rydberg series or image states will be addressed. Organic molecules (e.g. acetylene and toluene), DNA bases, porphyrines and biomolecules in solution are our long-term objectives.

Entire areas of today's technological developments, like opto-electronics or solar cells, are based on a controlled use of electronic excitations in nanostructures. Among the numerous very fundamental questions still open, we address the origin of the radiative decay channels and their relation to electronic states within crystallites or localized in the interfaces. Systems with several hundreds of atoms will be studied including many-body effects, in the framework of the combined solution of Dyson and Bethe-Salpeter equations. We are searching for a more efficient description of substrates and embeddings by using a basis of unperturbed bulk states instead of simple plane waves. We work in understanding the optical (emission) properties of Si and Ge quantum dots for various embeddings, alloying and structural/chemical properties of their interfaces. The oxidation and hydrogenation of nanocrystals will also help understanding nanostructured, porous, amorphous materials used in or proposed for solar cells.

In order to achieve the breakthrough in molecular electronics, a reliable theoretical description of transport is needed. Good candidates are the Landauer-Buttiker approach based on density-functional theory (LB-DFT), the non-equilibrium Green's function theory (NEGF), time-dependent density-functional theory (TDDFT), the Lang method or also the maximum-entropy approach.

Every direction contains obstacles: e.g new exchange and correlation functionals must be found in TDDFT to cope with the new dynamical correlations induced by the current flow; efficient implementations of NEGF taking into account out-of-equilibrium distributions and correlations. Even to specify the correct boundary conditions to calculate the current through a molecule has still to be settled. Applications will elucidate the I/V characteristic of molecules, the role of contacts, the Coulomb blockade, the Kondo effect, the current induced structural transformations, and the photoelectron injection in molecules.

The idealized decoupling of electronic and ionic degrees of freedom can be far from reality, especially in localized structures. Understanding the transfer of energy between electrons and ions will help identifying the yet unknown mechanism(s) occurring during the fragmentation of a cluster excited by a fast and intense laser, or to predict the changes in the molecular conformation under excitation. For example we computed non-adiabatic photoemission spectra for fullerene C_{60} and obtained striking agreement with experimentally measured spectra, previously not especially well understood.

We now are developing methods based on TDDFT and adiabatic as well as non-adiabatic dynamics, and also combine the ionic dynamics and the many-body framework (Bethe-Salpeter equation and/or newly developed TDDFT kernels). Our goal is to study the laser-induced chemical reactivity and isomerization of molecules: azobenzene ring, HCN-CNH, and then biological molecules like retinal.

Table of Contents

Electron-phonon coupling is at the core of many fundamental processes in material science, from superconductivity to material degradation. The combined description of electron-ion dynamics is of fundamental relevance to address the decaying mechanism and how those are affected by the 1D nature of the structures. Besides leading to temperature dependent broadening of optical spectral features this coupling can be use to control and monitor chemical reactions (and assembling) at surfaces

Low-dimensionality causes non-magnetic bulk material to exhibit magnetic response: this has important consequences for applications and up to now is poorly understood. The proper treatment requires the introduction of spin-orbit effects (magnetic anisotropy) and the existence of non-collinear magnetic structures. This task requires fundamental advances in the many-body (self-energy) description of electron correlations and, consequently, in the development of proper exchange-correlation functionals within TD-DFT. One natural application would be to study spintronics (spin-transport through molecular structures) and the behaviour of magnetic nanostructures supported on surfaces.

We have two main tasks:

- One, calculate the optical spectra of free-standing and interacting silicon wires as well as the effective electron-electron interaction influence of surface passivation on their structural properties. We will also study the electronic structure of metallic nanowires on semiconductor surfaces, as explained in C3, and the optical and EELS spectra of isolated carbon and boronnitride nanotubes. As a way towards complexity, we will tackle the analysis of response properties of more complicated structures, like multiwall nanotubes, the inclusion of other materials, and their 3D assemblies.
- Second, study the packing effects in the efficiency of polymer-based LEDs. We will also shed light on the nanotube/polymer precursor interaction, which is responsible of a change of the effective polymer conversion temperature thus influencing the efficiency of polymer-based LEDs. Finally, we will study the cohesion and resistance to light degradation of tube/polymer composites.

We will study of the role played by defects, and of water, oxygen and organic groups attached to the 1D-structures in the electronic properties. We will also address the optimal control of laser pulses to achieve a desired binding or desorption of molecules. This works goes towards the development of chemical and biological sensors (e.g, nanotubes have been shown to exhibit important changes of conductivity upon absorption of different gases and enzymes, this, of course, needs to be quantified and controlled).

Table of Contents

Surface problems, such as the dynamics of molecules on a surface, including catalysed reactions) present a variety of bonding situations and energy barriers, and so test present density-functional theory (DFT) methods to beyond their limits of accuracy. We shall build on current collaborations to develop more accurate methods within DFT (including generalised- Kohn-Sham DFT) and many-body perturbation theory (MBPT).

York and S. Sebastian teams will contribute through developments of the MBPT-GW method; Berlin-FU and Louvain will contribute orbital-dependent functionals, combining the RPA with appropriate TDDFT-XC kernels within the adiabatic connection approach. Milan and Rome will also participate, using GW and Green's Functions Methods. The new methods will describe bonding situations ranging from the van der Waals limit to highly covalent bonding. Van der Waals bonded systems are notoriously difficult in traditional density functional theory.

Improvements of present state-of-the-art methods for surface excited states:

- going beyond common approximations (e.g., extending the existing tools to spin-polarized systems);
- Developing numerically efficient schemes (i.e. with a favourable size-scaling), in order to allow for the study of large unit cells. Paris, S. Sebastian, Milan, Rome and Berlin-FU will collaborate on the development of new TDDFT Kernels; Rome and Jena will also contribute through the nondiagonal GW method.

Formation of self-assembled structures on surfaces. We will use DFT together with thermodynamics, to investigate structures and the driving forces of the self-assembly. Electronic excitations will be treated using state-of-the-art methods, as well as the improved tools obtained within task C2. Rome, Paris and S. Sebastian will look at the problem of the optical properties, Jena will work on self-assembled nanowires of metal atoms on Si surfaces.

Interaction of organic biomolecules with surfaces, using parameter-free theoretical methods (DFT, TDDFT, MBPT). We plan to study atomic structures, electronic excitations, optical properties (RAS), Auger and vibrational spectra. Jena, Rome, York and Milan will study, e.g., DNA bases, molecules like porphyrines, and molecules having an amine group which can act as a hook for the attachment to a surface.

Reactions of small molecules on surfaces, in connection with the new experiments with short-intense lasers, which promote specific chemical reaction (e.g., isomerization, or bonding to specific sites), through transitions to excited-state Born-Oppenheimer surfaces. S. Sebastian, Milan and Berlin-FHI will collaborate through suitable developments of both Green-function techniques and TDDFT. Jena and York will study excited states of simple molecules starting with CO and NO on Si surfaces, and moving on to H2O, CH3Cl and unsaturated cyclic hydrocarbons. Lund will study simple chemisorbed molecules, their vibrational and photoelectron spectra, including shake-up of excitations in the substrate and vibronic shake-up.

Spectral features related to interfaces, in particular to grain boundaries. It requires participation of specialists in the latter field (present in the Paris node), of experts in complex band structure calculations (Louvain), and of specialists of surface optical properties and anisotropy (Rome and Milan). SiO2 and SiHfO4 interfaces with other materials will be studied.

Goal: to understand the systematic changes in the electronic structure and electronic excitations (e.g. plasmons) when passing from a three-dimensional (bulk) material to a very thin layer. Confinement effects will be studied for selected materials, ranging from those used in semiconductor technology to catalytically active oxides. Multipole plasmons will be studied at Berlin-FHI; Berlin-FU will contribute using TDDFT, Rome will contribute through the GW method, and Milan with the embedding approach for a semi-infinite surface.

Table of Contents

For many standard materials the commonly used approximation that the DFT wave functions are almost identical to the quasi-particle wave functions obtained from GW or other sophisticated methods is valid. However, special systems which attracted also scientific and technological interest in the last few years require a more advanced treatment.

As soon as localised states (defect or surface/interface states, molecular orbitals, but also shallow core states of transition metals and heavy main group elements) play an important role for electronic and optical properties this approximation often breaks down and one has to take into account more carefully interactions (correlations) and intermixing of different states. A simple but technologically important material system is for example InN where strong p-d repulsion effects require a full diagonalisation of the problem. Similarly other nitrides or oxides of heavy elements possessing shallow core states or of transition metals are further clear candidates. Other critical benchmarks shall be molecules and molecular crystals. In particular we plan applications for systems involving hydrogen bridge bonds as e.g. ice and organic molecules.

Dynamical effects are currently treated in a manner which allows an accurate treatment of lowenergy excitations typically occurring in bulk systems. Molecular systems (important for bioscience), however, raise new challenges since they require a proper treatment of dynamical effects for giant excitation energies which are not yet handled properly. Current work in the network points the way forward. Simple molecules shall act as benchmark systems.

Spin is an important degree of freedom for all magnetic but also various molecular systems. The lack of inclusion of the spin degree of freedom in existing codes and methods often prevents application of these powerful tools to magnetic or molecular systems where spin effects (magnetism) play an important role. It is therefore essential to improve the existing methods and codes in this direction. Benchmark applications will be transition metal oxides, molecular systems and magnetic semiconductors.

TDDFT is a powerful tool for the calculation of optical properties. However, it turns out that the accuracy of TDDFT often breaks down for extended (bulk) systems. The basic reasons for this behaviour are already understood. It is now necessary to make use of these insights to improve the TDDFT codes to make them also applicable for bulk systems of technological relevance. Critical benchmarks shall be standard semiconductor materials and silicon dioxide, more advanced applications shall be amorphous Si, polymers, and organic crystals.

A comprehensive understanding of the nonlinear optical properties of solids is crucial for the improvement of the nonlinear materials and devices and provides an opportunity to search for new materials. Nonlinear optics also has a great potential as a characterization technique for materials, because of its sensitivity to symmetry. In order to extract the maximum amount of information from such measurements, a quantitative theoretical analysis is required.

One important nonlinear process is second harmonic generation. Since its discovery in 1961, many difficulties delayed the accurate calculation of the corresponding susceptibility for many years. Although several calculations have been performed for various semiconductors, the agreement with the experimental measurements is far from being satisfactory and a consistent picture could not emerge from these calculations.

We will develop theory and software to calculate nonlinear susceptibilities: in particular, we will generalize the developments made in the framework of linear response time-dependent density functional theory to the case of the nonlinear response, in order to get accurate values for the second and third order susceptibilities in an efficient way. Attention will be paid to excitonic and/or local-field effects

One of the greatest challenges of modern solid-state theory is to understand strongly correlated materials.

While the photo-electron spectrum of solids such as NiO or FeO can be interpreted to some extent on the basis of Hubbard-type model calculations, there exists, as yet, no parameter- free abinitio theory for these materials. This problem will be approached from two different angles: (i) with many-body perturbation theory by including suitably chosen vertex functions in the GW scheme; (ii) with a density-matrix functional approach. The latter has proven successful in the chemistsâ€™ paradigms of strongly correlated molecules [S. Goedecker, C.J. Umrigar, Phys. Rev. Lett. 81, 866 (1998); E.J. Baerends, Phys. Rev. Lett. 87, 133004 (2001); K. Yasuda, Phys. Rev. Lett. 88, 053001 (2002)] and the goal of this project is to generalise the method to periodic solids. Furthermore, the approach will be generalised to finite temperature to achieve an ab-initio description of the phase diagram of Mott insulators as well as strongly correlated superconductors.

Table of Contents

Phase change materials are a class of alloys characterized by a very fast structural change and a pronounced optical/electrical contrast between the crystalline and the amorphous phase. These materials are at the basis of the present technology of rewritable DVDs and are promising candidates for future non-volatile memories. To understand the microscopic mechanism that allows for such peculiar electronic properties is essential for a systematic material optimization of phase change alloys. Calculations performed by ETSF groups have made a link between the strong optical contrast and local structural changes. (Read more)

The study of the optical properties of biochromophores has developed into an important and active field of research. The rationale is clear, as the absorption and emission of light by biomolecules are at the center of crucial biophysical processes -- such as vision or photosynthesis, and has led to various important technological applications. Among photo-active proteins, and due to its unique photophysical properties, the family composed by the green fluorescent protein (GFP) and its mutants has attracted a considerable amount of attention during the last decade. (Read more)

IOP publishing

The miniaturization process in the integration scale of modern Electronics according to Moore's law will attain in 2015 its ultimate limit: that one of Electronic Devices at the Atomic and Molecular scale of a Nanometer. The theory faces now the challenge to understand and model the Quantum Mechanisms governing the Electron Transport at such scale and, as a last issue, to predict from First Principles the I/V Electronic Characteristics of Nanodevices. The ETSF is actively involved into all these tasks. (Read more)

Solar (or photovoltaic) cells are the symbol of clean and safe energy production, as they convert into electric power the prime source of renewable energy, the sunlight. The present technology of solar cells is based on silicon. However, this solution is not satisfactory as it does not allow a good compromise between cost production and efficiency. New materials with interesting electronic properties are now under study in search for new candidates for future commercial cells. Simulation of the optical properties of promising materials for photovoltaic applications is work in progress in ETSF groups. (Read more)

The structure of the surfaces of Ge, Si or GaAs, with varying composition and reconstruction, can be established thanks to the comparison of measured spectra to high level calculations. (Read more)

Several Tellurides alloys containing Ge and Sb exhibit a pronounced contrast in the optical absorption of the crystalline and the amorphous state. This phenomenon is the basis for their application in **optical data storage** e.g. in **rewritable DVDs**. These two phases also present a profound change in electrical properties 'such as the resistivity change' which is one of the crucial features that would be used in phase change random access memories, a very promising candidate for future non-volatile memories.

To understand the change in optical properties upon amorphization of the phase change materials (PCM), **experimentalists in Germany** [1] wanted to correlate a macroscopic measurement like the optical properties with microscopic details like the local atomic structure. Using *ab initio* calculations on structural models with different local order, **theoreticians in Palaiseau node** [2,3] proved that the optical contrast between the two phases is due to the change of the number of first neighbours of Ge atom and that it should be possible to adjust the optical contrast by changing the composition of the PCM. These results provide a fundamentally new insight in the physics of the optical absorption of amorphous materials and in addition they represent important contributions to a systematic material optimization of phase change alloys.

**This example illustrates how first principles calculations can provide an ideal complementary tool in technological issues.**

[1] A. Kolobov, P. Fons, A. Frenkel, A. Ankudinov, J. Tominaga, and T. Uruga, Nature Materials **3**, 703 (2004).

[2] W. Welnic, A. Pamungkas, R. Detemple, C. Steimer, S. BlÃ¼gel, and M. Wuttig, Nature Materials **5**, 56 (2006).

[3] W. Welnic, S. Botti, L. Reining and M. Wuttig, Optical contrast in phase change materials, submitted.

Not surprisingly, the theoretical understanding of biophysical processes is a very active field of research. However, and in spite of the large amount of experimental work in photo-active molecules, the theoretical description of the interaction of these molecules with external time-dependent fields is very much in its infancy. Many biological processes rely on a subtle interplay between optical absorption in the photo-active center and its coupling to internal vibrational modes and to the environment (hosting protein and solvent). The most famous of these processes is vision, that is triggered by a photo-isomerization mechanism. Another paradigmatic case is the green fluorescent protein (GFP). This molecule has become a unique tool in various kinds of biomedical research due to its fluorescence and inertness when attached to other proteins.

Several members of the ETFS are currently involved in the study of the processes of light absorption and luminescence of the GFP and its mutants. It is hoped that a better understanding of the basic processes will allow for the design of novel mutants of the GFP or of other completely new chromophores with enhanced properties.

The study of the optical properties of biochromophores has developed into an important and active field of research. The rationale is clear, as the absorption and emission of light by biomolecules are at the center of crucial biophysical processes -- such as vision or photosynthesis, and has led to various important technological applications. Among photo-active proteins, and due to its unique photophysical properties, the family composed by the green fluorescent protein (GFP) and its mutants has attracted a considerable amount of attention during the last decade. These molecules have been used as important and versatile fluorescent markers, with widespread applications in the field of biotechnology. One of the originalities of the GFP resides in the fact that the chromophore responsible for the photophysics of the protein, 4-(p)-hydroxybenzylidene-imidazolidin-5-one, is completely generated by an autocatalytic, post-translational cyclization and oxidation of the --Ser66--Tyr66--Gly67-- triad, without the need of any external cofactor. Thus, all the information needed to synthesize the biochromophore is encoded in the corresponding gene. Furthermore, the GFP can be easily attached to other proteins without changing its own absorption properties. This unique characteristic, due to the protective cage-like secondary structure of the protein, makes the GFP an ideal candidate for a biological marker.

With the widespread use of the GFP, there has been an increasing demand for the ability to visualize different proteins in vivo that require multicolor mode imaging. This has triggered intensive research aimed at the development of GFP-mutant forms with different optical responses. A mutant of the chromophore of particular interest is the Y66H variant, in which Tyr66 is mutated to His. The resultant protein exhibits fluorescence shifted to the blue range, and is for that reasonoften referred to as the blue emission variant of the GFP, or the blue fluorescent protein.

Calculations on the chromophores of the green fluorescent protein, the blue fluorescent mutant (Y66H), and the photoactive yellow protein have appeared recently. Some of these carried out by members of the proponent team. To illustrate the usefulness of these calculations, we take the case of the GFP. The main excitation peaks, calculated using time-dependent density functional theory (TDDFT), for the neutral and anionic forms are at 3.01 and 2.67 eV, respectively, in really good agreement with the measured excitation energies, located at 3.05 and 2.63 eV. Furthermore, the comparison to the experimental spectrum allows for the clear assignment of the measured peaks to either the neutral or anionic forms of the GFP. Finally, from the calculations it is possible to extract a 4:1 ratio for the concentration of the neutral/anionic forms in vivo, which is very close to the estimated experimental ratio of 80% neutral and 20% anionic.

Note that the process of light absorption and emission is quantum mechanical, and it is not therefore, accessible using the classical mechanics techniques usually applied in biochemistry. However, the size of the problem (that involves thousands of atoms), and its complexity forbid the use of pure quantum mechanical approaches. Therefore, the solution of such problems requires a mixture of approaches.

- T. Wilson and J. W. Hastings, Annu. Rev. Cell Dev. Biol.
**14**197-230 (1998). - V. Pieribone and D. F. Gruber, Alone in the Dark: the Revolutionary Science of Biofluorescence (The Belknap Press of Harvard University Press, Cambridge, Massachussetts).
- M.A.L. Marques, et al, Phys. Rev. Lett.
**90**, 258101 (2003); X. Lopez, et al, J. Am. Chem. Soc.**127**, 12329-12337 (2005).

Since the introduction of the integrated circuit or chip in the sixties, the power of microprocessors has always grown together with the integration scale, following what is called the Moore's law. If such a miniaturization rate will continue, modern electronics will attain its ultimate limit, the molecular and atomic scale, around the year 2015. As a consequence, Electronics at the Nanoscale, namely Nanoelectronics, represents the next years' technological challenge. A bottom-up process instead of a top-down as followed so far, will allow the realization of Electronic Devices made out of Molecules and Nanostructures. And this is boosted not only by the need for shorter integration scales, and device miniaturization, but also by the expectation that unusual quantum effects are going to be observed due to quantum phenomena effects.

Beside the experimental efforts to synthesize nanoelectronic devices, quantum transport theory has the formidable task to understand and to model the mechanisms behind these phenomena and to predict them from a first principles approach.

Several years ago, important progresses have been accomplished in the theory of quantum transport thank to the setup of two frameworks: the Landauer-Buttiker (LB) and Kubo-Greenwood formalisms. These two formalisms rely on theories able to provide the electronic structure of the nanodevices. And these can be the semi-empirical Tight-Binding (TB); or fully ab initio Density-Functional Theory (DFT).

The Landauer-Buttiker on the top of Density-Functional Theory, today to be considered the state-of-the-art, has demonstrated its ability to describe small bias coherent transport in nanojunctions. These approaches were successful in accounting for the contact resistance and conductance degrading mechanisms induced by impurities, defects and non-commensurability patterns in the conductor region.

The theoretical effort and trend today is to move toward theories able to account for non-coherent and dissipative effects due to electron-phonon and electron-electron scattering mechanisms inside the conductor and for non-linear response, far from equilibrium, finite-bias transport. Along these directions, the two major research lines are Time-Dependent Density-Functional Theory (TDDFT) [Runge, E.K.U. Gross, W. Kohn]; and Non-Equilibrium Green's Function (NEGF) theory [Schwinger, Baym, Kadanoff, Keldysh]. Both NEGF and also TDDFT [G. Stefanucci, C.-O. Almbladh] are in principle correct frameworks to address the above objections.

Researchers at the Rhone-Alpes associated ETSF node have demonstrated [Darancet et al], in the framework of NEGF, that a GW approximation on the Self-Energy can introduce diffusion and loss-of-coherence effects due to the electron-electron scattering and giving rise to reduction of conductance and appearance of resistance inside the conductor.

Together with the result of another theory group in Copenhaguen who introduced electron-phonon scattering effects through a self-consistent Born approximation (SCBA), their calculated conductance characteristics as a function of the applied voltage for a gold monoatomic nanowire fully explains all the features present in the experimental measures of Agrait et al.

P. Darancet, A. Ferretti, D. Mayou and V. Olevano, Phys. Rev. B (2007).

T. Frederiksen, M. Brandbyge, N. Lorente, and A.-P. Jauho, Phys. Rev. Lett., **93**, 256601 (2004).

G. Stefanucci and C.-O. Almbladh, Europhysics Letters** 67**, 14 (2004).

N. Agrait, C. Untiedt, G. Rubio-Bollinger and S. Vieira, Phys. Rev. Lett., **88**, 216803 (2002).

Silicon solar cell efficiencies vary from 6% for amorphous silicon-based solar cells to 30% or higher with multiple-junction research lab cells. Solar cell energy conversion efficiencies for commercially available crystalline Si solar cells are around 14-16%. The highest efficiency cells have not always been the most economical - for example a 30% efficient multijunction cell based on exotic materials such as gallium arsenide or indium selenide and produced in low volume might well cost one hundred times as much as an 8% efficient amorphous silicon cell in mass production, while only delivering about four times the electrical power.

Organic solar cells and polymer solar cells are built from thin films (typically 100 nm) of organic semiconductors such as polymers and small-molecule compounds like polyphenylene vinylene, copper phthalocyanine (a blue or green organic pigment) and carbon fullerenes. Energy conversion efficiencies achieved to date using conductive polymers are as low as 4-5% for the best cells to date. However, these cells could be beneficial for some applications where mechanical flexibility and disposability are important.

Ternary I-III-VI compounds, members of the chalcopyrite semiconductor family, are promising solutions for the production of economically competitive photovoltaic energy. For example, Cu(In,Ga)(S,Se)_{2} compounds reach conversion efficiencies of 22.5%. However, indium is rather rare in the earth crust. This problem limits strongly the expectation of maximum production of solar modules based on this material. As a consequence, it is very important to investigate the possibility to replace In with other more abundant elements, without losing the electronic properties that make this compound so attractive.

The challenges for material science related to the development of solar cells are on two levels: to study new materials created in a controlled way and to characterize the material in detail, especially with spectroscopic methods. In view of that, numerical simulations of structural, electronic and optical properties are extremely valuable in the design of advanced materials for photovoltaics.

[1] G. D. Scholes and G. Rumbles, Nature Materials **5**, 683 (2006).

[2] J-M Raulot, C. Domain, J-F. Guillemoles, Phys. Rev. B **71**, 035203 (2005).

[3] P. Peumans, S. Uchida, and S. R. Forrest, Nature **425**, 158 (2003).

[4] W. U. Huynh, J. J. Dittmer, A. P. Alivisatos, Science **295**, 2425 (2002).

We study the two lowest-energy isomers of the Ge(111)-(2x1) surface, by a state-of-the-art first-principles calculation of their optical spectra, including the electron-hole interaction effects. A comparison of our results with the available experimental data suggests that, at difference with the Silicon case, the stablest isomer *differs* from the standard buckled Pandey chains reconstruction. This conclusion is supported by accurate total-energy results.

Fig.1 Two possible reconstructions

Fig.2 Experiment compared with the BSE results of both reconstructions.

- We have studied the two lowest-energy isomers of the Ge(111)-(2x1) surface, by a state-of-the-art parameter-free calculation of their total energy and optical spectra, including the electron-hole interaction effects.
- The two isomers yield a surface geometry which differs only starting from the third atomic layer below the uppermost one, hence experimental probes like STM can hardly be employed to discriminate between the two isomers.
- Optical properties deduced from electronic structure results obtained at the one-particle level - i.e. neglecting the electron-hole interaction effects - cannot be used to discriminate between the two isomers.
- A comparison of our results with the available experimental data suggests that, at difference with the Silicon case, the stablest isomer differs from the standard buckled Pandey chains reconstruction.
- The upper panel in Fig.2 is for the positively buckled (i.e., the traditional) Pandey chain while the lower panel is for the negatively buckled chain. In both panels, the full (dashed) curves include (neglect) excitonic effects.
- In conclusion, the ground-state geometry of Ge(111)(2x1) is found to correspond to Pandey-like chains with a buckling angle in the opposite direction with respect to that of the commonly assumed geometry. This work has been published in Phys. Rev. Lett.
**85**, 5440 (2000) - Our conclusions have been later confirmed by low-temperature STM experiments: see R.M. Feeenstra, G. Meyer, F. Moresco and K.H. Rieder, Phys. Rev. B
**64**, 081306 (2001).

Approximately 200 scientists across Europe and the United States contribute their time to the operation of the ETSF. The income to meet ETSF activity comes from various sources: to a significant extent from participating institutions, from regional and national sources, from the EU Framework Programme, and more and more through income directly from private foundations and industrial users of the ETSF (together with sponsorship).

Much of the ETSF's funding comes from the institutions of the various nodes. Aside from employing most of our permanent researchers, this funding has also provided support to the ETSF in terms of permanent managerial, administrative and technical personnel, as well as office space and computing time.

Almost all of our post-docs and PhD students are funded through national or regional schemes.

The European Theoretical Spectroscopy Facility I3 (ETSF-I3) project was an Electronic Integrated Infrastructure Initiative (‘e-I3’) undertaken by the European Theoretical Spectroscopy Facility network and the Barcelona Supercomputing Center, and funded by the European Commission's Framework Programme 7. The project ran from January 2008 to June 2011.

Nanoquanta, a Network of Excellence performing fundamental Physics research, was funded by the European Commission's Sixth Framework Programme from 2004-2008.

The Carl-Zeiss foundation (Carl-Zeiss-Stiftung) was founded in 1889 by Ernst Abbe. According to the intention of its founder, it promotes science and research in the field of natural science and engineering communities. It's activities are limited to the states of Baden-Wuerttemberg, Rhineland-Palatinate and Thuringia.

EDF is the world’s leading nuclear energy company, with solid positions in major European countries. They are committed to investing in sustainable industrial growth, based on three core principles: leading the global nuclear revival; fostering the development of renewable energies and energy efficiency; consolidating their positions in Europe.

RTE, an independent subsidiary of the EDF Group, manages the French electricity transport network. As a public service-provider, its mission is the operation, maintenance and development of the network and very high voltage. It guarantees smooth operation and power system reliability.

Saint-Gobain Recherche is a major industrial laboratory working in the field of materials (glasses of the future, composite materials, intelligent materials, advanced processes). Its main task is to carry out research for the industrial Sectors of the Saint-Gobain Group.

Every year the ETSF organises at least one high-level conference focusing on the active research areas of the ETSF. They have emerged from the long series of Nanoquanta series of workshops (see below), that have been instrumental for the professional development of many of the current ETSF members. Each year the conference is organised in a different location in Europe.

It has grown into a five day format with more than 100 participants. Presentations are given by invited and contributed speakers from in- and outside the network and are organised in separate sessions, each one illustrating a particular aspect of the focus topic(s). The program of oral presentations is complemented by a dedicated poster session, but posters are almost always on display for the whole conference duration.

Discussions after every presentation and at the posters are usually active and lively. The most interesting or controversial aspects and possible new trends or paradigms that emerge throughout the conference are collected and channelled into more in-depth round table discussions that take place towards the end of the meeting. Since 2006 an expert on gender or society issues is invited to every meeting to give a seminar on one of the non-scientific topics that affects all of our daily lives as scientists and that forms part of the ETSF's social policy.

**Interdisciplinary views on quantum many-body theory**

Twenty-first Nanoquanta-ETSF Series of Workshops on Electronic Excitations

Milan, Itay [11-14 September 2018]

**Dynamics and spectroscopy of correlated systems**

Twenty first Nanoquanta-ETSF Series of Workshops on Electronic Excitations

Lund, Sweden [20-23 September 2016]

**ETSF Workshop 2015**

Twentieth Nanoquanta-ETSF Series of Workshops on Electronic Excitations

Paris, France [14-18 December 2015]

**Complex systems in Biology and Nanoscience**

Nineteenth Nanoquanta-ETSF Series of Workshops on Electronic Excitations

Zaragoza (Spain) [23 - 26 Septembre 2014]**Applications to functional and energy material**

Eighteenth Nanoquanta-ETSF Series of Workshops on Electronic Excitations

Luxembourg [1-4 October 2013]**Advanced Green function methods**

Seventeenth Nanoquanta-ETSF Series of Workshops on Electronic Excitations

Coimbra (Portugal) [2-5 October 2012]**Bridging theory and experiment**

Sixteenth Nanoquanta-ETSF Series of Workshops on Electronic Excitations

Turin (Italy) [27-30 September 2011]**New Frontiers in Theoretical Spectroscopy and Quantum Transport**

Fifteenth Nanoquanta-ETSF Series of Workshops on Electronic Excitations

Berlin (Germany) [11-15 October 2010]**Ab-initio tools for the characterization of nanostructures**Fourteenth in the Nanoquanta-ETSF Series of Workshops on Electronic Excitations

Evora (Portugal) [14-19 September 2009]**Theoretical Spectroscopy and Quantum Transport**Thirteenth in the Nanoquanta-ETSF Series of Workshops on Electronic Excitations

Pugnochiuso-Vieste (Italy) [22-27 September 2008]**Time Dependent Density Functional Theory: Advances and Prospects**Twelfth in the Nanoquanta-ETSF series of Workshops

Aussois (France) [18-22 September 2007]**A decade of applications of the Bethe-Salpeter Equation**Eleventh in the Nanoquanta-ETSF series of Workshops

Houffalize (Belgium) [19-22 September 2006]**40 Years of the GW Approximation for the Electronic Self-Energy: Achievements and Challenges**Tenth in the Nanoquanta-ETSF series of Workshops

Bad Honnef (Germany) [12-15 September 2005]. Download the book of abstracts.**Theory and Modeling of Electronic Excitations in Nanoscience**Nineth in the Nanoquanta-ETSF series of Workshops

Maratea (Italy) [19-23 September 2004]**Ab initio Electrons Excitations Theory: Towards Systems of Biological Interest**Eighth in the Nanoquanta-ETSF series of Workshops

San Sebastián (Spain) [21-24 September 2003]**Ab initio Theoretical Approaches to the Electronic Structure and Optical Spectra of Materials**Seventh in the Nanoquanta-ETSF series of Workshops

Lyon (France) [23-25 September 2002]**Excited states and electronic spectra**Sixth in the Nanoquanta-ETSF series of Workshops

Lyon (France) [20-22 July 2000]**Calculation of Electronic Excitations in Finite and Infinite Systems**Fifth in the Nanoquanta-ETSF series of Workshops

Lyon (France) [1-3 September 1999]**Spectroscopy of Electronic Excitations in Materials**Fourth in the Nanoquanta-ETSF series of Workshops

Valladolid (Spain) [7-9 September 1998]**Electronic Exchange and Correlation in Advanced Materials**Third in the Nanoquanta-ETSF series of Workshops

Lyon (France) [11-12 September 1997]**Electronic Exchange and Correlation in Advanced Materials**Second in the Nanoquanta-ETSF series of Workshops

Palaiseau (France) [26-28 September 1996]**Electronic Exchange and Correlation in Advanced Materials**First in the Nanoquanta-ETSF series of Workshops

Rome (Italy) [September 1995]

**11th Young Researchers' Meeting**

Rome (Italy) [12-16 May 2014]**10th Young Researchers' Meeting**

Budapest (Hungary) [20-24 May 2013]**9th Young Researchers' Meeting**

Brussels (Belgium) [21-25 May 2012]**8th ETSF Young Researchers' Meeting**

Naples - 16-20 May 2011**Seventh ETSF Young Researchers' Meeting**

Jyväskylä - 30 May - 4 June 2010**Sixth ETSF Young Researchers' Meeting**

Berlin - 2-6 June 2009**Fifth ETSF-Nanoquanta Young Researchers' Meeting**

Modena - 20-23 May 2008**Fourth Nanoquanta Young Researchers' Meeting**

San Sebastian - 15-18 May 2007**Third Nanoquanta Young Researchers' Meeting**

Rome - 3-5 May 2006**Second Nanoquanta Young Researchers' Meeting**

Berlin - 2-4 May 2005**First Nanophase-Nanoquanta Young Researchers' Meeting**

Palaiseau - 6-8 May 2004

The ETSF was developed within the Nanoquanta Network of Excellence, a network which was funded by the European Union for 4 years from 2004 to 2008. However, the idea for its creation stems from 15 years of ongoing and expanding collaborations between a number of Condensed Matter Theory groups in Europe. With the growing success of *ab initio* calculations, the demand for collaborations using the developed software and support for these calculations was and still is growing rapidly amongst theoreticians and experimentalists.

Researchers in both the public sector and private companies are challenging their theoretical colleagues to provide methods and computer programs to explain their experimental findings. The Nanoquanta Network of Excellence was set up in 2004 with the major aim to find a long-term answer to this challenge.

The structure of experimental synchrotron facilities served as a role model in setting up the ETSF. Just as synchrotrons provide a service to experimentalists worldwide by supporting the performance of their experiments, the ETSF provides a service to experimentalists all over the world by offering theoretical support to interpret the results of those experiments.

In early spring 2007, the fully established ETSF had its first call for proposals and created a central ETSF node in Belgium. To date, a total of 280 proposals have been submitted to the ETSF, and 221 have been approved by the steering committee. The ETSF is now an operational virtual facility with funding under the European Union Seventh Framework Programme.